OT: anyone 3D print?

[oaken1]

Flava Bird?

now that would be something. Print a huge clock face about 14 inches across with the Cards logo in the center....discerning neckwear

 

[oaken1]

These would be kind of cool but I would make the Cards head way bigger.

You must be registered for see images attach

if you can do it such that 20 bucks plus shipping makes it worthwhile...make me one too!!!!

please.......

 

[Devilmaycare]

and it comes life sized!!!!

Even better, the slicer allows you to scale up the print. We could do a 6'2" or 6'4" version to have the QB we all want.

 

[Devilmaycare]

602, should you EVER. Please let me know. I'll gladly throw my request in for one.

now that would be something. Print a huge clock face about 14 inches across with the Cards logo in the center....discerning neckwear

Both of these would be pretty easy to do since there's already the model for it, up to about 10" that is. Most of the printers mentioned so far have a max build volume of 256mm^3. So anything up to about 10"x10" is trivial. It just takes a little longer to print that large. There's a clock kit that can be purchased too that give the mechanicals for making one.

I can look at doing a couple of them if you guys are want them. I'll check after work if I have the correct colors already. I'm not sure if the couple shades of red that I have will work or not. I might have to get a red that's more cardinals red.

 

[Dan H]

Both of these would be pretty easy to do since there's already the model for it, up to about 10" that is. Most of the printers mentioned so far have a max build volume of 256mm^3. So anything up to about 10"x10" is trivial. It just takes a little longer to print that large. There's a clock kit that can be purchased too that give the mechanicals for making one.

I can look at doing a couple of them if you guys are want them. I'll check after work if I have the correct colors already. I'm not sure if the couple shades of red that I have will work or not. I might have to get a red that's more cardinals red.

I wonder if there’s a Pantone match to the available Bambu filaments.

EDIT

This might work.

Color Match

filamentcolors.xyz

 

[JohnnyCakes]

Maybe she can't print you some balls. https://makerworld.com/en/models/215079?from=search#profileId-234305

Bravo!!

 

[cardncubfan]

Almost daily in my machine shop.

You must be registered for see images attach

What's the name of your shop? I run a specialized machine shop in Chandler. We mainly build & repair plastic injection molds but do other machining as well. We've built molds for AR & AK 30rd mags & have worked on several others.

 

[602 Native]

What's the name of your shop? I run a specialized machine shop in Chandler. We mainly build & repair plastic injection molds but do other machining as well. We've built molds for AR & AK 30rd mags & have worked on several others.

PHENX Products
phenxproducts.com

 

[602 Native]

What's the name of your shop? I run a specialized machine shop in Chandler. We mainly build & repair plastic injection molds but do other machining as well. We've built molds for AR & AK 30rd mags & have worked on several others.

Whats the name of your shop?

 

[cardncubfan]

Whats the name of your shop?

Quality Mold

 

[Devilmaycare]

Test print came out not too bad. The yellow I had is really close. The red is a little bit off but doesn't look back in person. Overall it looks good by itself but I need to put it by something official to see how off the colors look.

You must be registered for see images attach

 

[602 Native]

Test print came out not too bad. The yellow I had is really close. The red is a little bit off but doesn't look back in person. Overall it looks good by itself but I need to put it by something official to see how off the colors look.

You must be registered for see images attach

Nice!

What was run time?

 

[Germz249]

You must be registered for see images attach

 

[Germz249]

I may have to hit you guys up for some work on prototypes. The company I work for are always looking to go local depending on the turn around time.

 

[Dan H]

You must be registered for see images attach

 

[Syracusecards]

Why am I still reading this…..

 

[TJ]

My daughter is in the process of creating an Etsy page to sell prints. She's taking classes on Fusion 360

 

[Dan H]

I hate shuffling cards …

You must be registered for see images attach

 

[TJ]

I hate shuffling cards …

You must be registered for see images attach

Bro! I need this in my life

 

[Devilmaycare]

Nice!

What was run time?

I printed at 50% scale, which is still 4.75" across, and it was 1h25m. I'm showing a 3h49 estimate for it at 100%. At 100 there's 55 filament changes which slows it down a bit. I'd probably slow it down a little bit more too by turning on ironing for the top layers.

 

[Devilmaycare]

You must be registered for see images attach

You must be registered for see images attach

For you AMSs:

https://makerworld.com/en/models/158496#profileId-173988

Secure AMS Feed Saver & Smooth Fix - Not A Button by YelTrik Designs - Click FOLLOW

“Feeder Saver” - The AMS is an engineering marvel. However, the infamous feeder “button”, AKA Feed Funnel, has caused much concern when it comes to longevity. Simply put, it will wear on the edges of the feeder filament entry forcing a potentially expensive replacement of the AMS First Stage...

makerworld.com

It'll thank you. Both of mine usually sit at 10-12% humidity. I never have to re-dry filament.

 

[Dan H]

Interesting. The office where I keep my printers also has my server rack, so it stays pretty warm and dry. Nice in the winter, not so much in July and August.

 

[phillycard]

Test print came out not too bad. The yellow I had is really close. The red is a little bit off but doesn't look back in person. Overall it looks good by itself but I need to put it by something official to see how off the colors look.

You must be registered for see images attach

Sweet!!!